End Connector 8 D30-90° Al
Order number: A8-D30-90-AL
Consists of:
2 Connector halves, GD-Al, blank
Adapter 8 D30 Al, GD-Al, blank
Cap screw DIN 912, M6x28, St, galvanized
Hexagon nut DIN 985 (self-locking), St, galvanized
m = 132,0 g
Zugeschnittene bzw. individuell bearbeitete Waren sind vom Umtausch und der Warenrückgabe ausgeschlossen.
The end connector 8 D30-90° Al is a link between profiles of series 8 and profile tubes of series D30. The use of the end connector enables a hybrid design. Round tubes and their connection technology can be combined quickly and easily with all profiles with 8 mm T-slots. The anti-twist devices are equipped with predetermined breaking points and can be broken off according to the mounting direction. The tightening torque of the fastening screw is M = 10 Nm. The maximum holding force against displacement is Fz = 500 N. The intended immersion depth of the profile tube in the fastener is 25 mm. For connection to profile slot 8, a cap screw DIN 912, M6x16 and a T-slot nut 8 StM6, which are not included in the scope of delivery, are recommended.
Order number: A8-D30-90-AL
Consists of:
2 Connector halves, GD-Al, blank
Adapter 8 D30 Al, GD-Al, blank
Cap screw DIN 912, M6x28, St, galvanized
Hexagon nut DIN 985 (self-locking), St, galvanized
m = 132,0 g